Pages

Selasa, 29 Maret 2016

No Longer Shiftless

Previous to cutting in the hatches, I worked on making the cut in my deck for mounting the throttle/shift control. While I had originally planned to get a stainless steel metal bezel made, my fellow boat builder Ted suggested that I make a wood bezel....great idea! I decided that a two piece bezel would provide a tighter fit and cover up the "dogbone" look of the deck cut out.




Starting with a mock up "box" to mount the controller, I developed the cut out hole that would allow installing the controller levers up through the hole. This mock-up work provided lots of procrastination time from cutting into the real deck and was worth the trouble. After figuring out the cut-out hole size and shape, I used scraps from the deck planking to make the bezel. The deck edge was used to trace a gentle curve to the long edges as a rectangular bezel just didnt look right with all the curves of the boat.



After making the bezel it looked like it might interfere with where I might want to locate the windshield bracket, so I decided to move the controller outboard 3/4". So an auxiliary extender piece was made to add to the carling to shift the shifter and better reinforce the mounting holes. Finally, I put some blue tape on the deck, laid out the hole, "took a brave pill" and drilled a couple of big a*# holes in the deck. Using a hand saw I cut between the holes. Bla, bla, bla, ...look at the pictures.




The first photo shows the mock-up box, the second the deck cutout and the bezel split apart. The third has the bezel located around the shifter and the fourth the extender piece underneath that was added.

Related Posts by Categories

0 komentar:

Posting Komentar