The new drive plate has been made and fitted. Once the drive plate and new support frame was fully bolted into place a final dial gauge test was done....
Boat building has stalled in the last few weeks as I realize that the raising of each frame will bring the project one step closer to completion or calamity....
The first step to the shears was getting the length down to about 18" longer than what I measured to be required. Since the fit of the shear to the breasthook...
The first step in the deck planking process was laying out the lines on the subdeck plywood so I could figure out what wood I needed to do the job. I...
Capt. Larry Simns has probably had some effect on your life if you are in any part of the seafood industry, if you like to fish, if you are concerned...
I apologise for my long gap between posts, life has been very full for awhile.Jigsaw joints have become a popular method for joining 8ft plywood lengths...
Its always nice when someone posts photos of your work on the web, especially when they have expertise about the boat in question. This is a model of...